Universal accessories [1:35 scale]

Pots and lids (No. 35 23039)

Set of resin models made by 3D prinng method containing: 5l pot + lid (2 pcs), 12l pot + lid (2 pcs), 20l pot + lid (2 pcs).

 

 

Cast iron and bathroom radiator (No. 35 23024)​

Set consists of the elements needed to create three cast iron radiators and one bathroom radiator.
Single ribs allow to create any size of the radiator (adjusted to the size of the room), and to perfectly paint each element before gluing – for e.g. making stains and adding dust. A valuable addition are control valves – thermostats and connectors at the radiator’s water outlet. Due to their small size, each set includes a spare ones.
The first radiator was created in 1855 by Franz San Galli. His invention revolutionized and forever changed the way of heating rooms. Constructed in the mid-nineteenth century, the heater operated thanks to the compressed and hot steam that circulated in a system of pipes and radiators. The principle of operation has not changed to this day.

Acoustic guitar (No. 35 23032)​

Set consists of 2 acoustic guitars and a wire – strings. All elements of the guitar have been reproduced in the model: reed, frets, bridge and soundhole.
The acoustic guitar is widely used in popular music – jazz, rock, blues, country and folk music. It is the most popular and recognizable musical instrument.
The acoustic guitar is the key element in camping diorama, a teenager’s room, a club, a concert, an army camp, a music studio, a street in a historic district or a beer collector in a modern park – and these are only a few ideas from the wide range of possibilities of using this model.

Park lanterns (No. 35 22002)

Set of five lanterns enriches any diorama of a modern or pre-war street or park alley.
The lantern consists of 9 elements, two of which are made of transparent resin. The pole consists of four parts, the last element is connected to the delicate arms supporting the lampshades, inside which you can see the bulb.
The model is made by 3D printing, which allows you to make unusual delicate and small elements.
For the best effect, it is worth covering transparent parts with a colorless varnish, for e.g. Mr. COLOR GX112.

Park benches and litter bins (No. 35 22009)

An alley in the park or a barricade on the street, an elegant bench with carved sides and made of real boards will diversify many diorama. The set also includes an elegant garbage can with a roof based on a steel pipe. It is possible to install it directly in the mock-up base or on the included base. The model is made using the 3D printing method, which allows for the production of extremely delicate and small elements. Cutting out parts of the model from the supports is extremely simple, although it is worth noting that it is recommended to first cut the supports from the base and only then remove them from the model.

Station benches and litter bins (No. 35 22010)

A street near the station, a bus stop or maybe an element of a barricade, a reinforced concrete bench made of real boards will diversify many a diorama. The set includes a concrete garbage can with a steel insert. The model is made using the 3D printing method, which allows for the production of extremely delicate and small elements. Cutting out parts of the model from the supports is extremely simple, although it is worth noting that it is recommended to first cut the supports from the base and only then remove them from the model.

Hydrant type 1 (No. 35 24059)

An element of public space, although common, completely unnoticed on the street. Everyone will definitely notice him in the diorama.

The set includes 3 identical hydrants.

Gas inspection shaft (No. 35 23034)

The set includes two gas inspection wells. Each consists of a body and a cover. The inspection chamber is an element of the installation intended for checking its condition, performing repairs and adjustments. They are necessary in critical installation points, which is why in urban space they appear both in the road lane and on lawns, sidewalks and parking lots. The manhole set is a simple way to add authenticity to your street diorama. Currently, manholes are usually made of black plastic (body) and a yellow cast iron cover. Diameter of the part on the surface – 5.42mm.

Hydrant inspection shaft (No. 35 23035)

The set includes two street boxes for underground hydrants. Each well consists of a body and a cover. Currently, manholes are usually made of plastic (body) and a cast iron cover. Dimensions of the part on the surface – 10.31 x 7.42mm.

Cast iron sewer manhole (No. 35 23036)

Set consists of 2 wells – each is made in two parts: body and cover.
A cast-iron manhole designed to cover underground elements of land utilities. It enables free access to sewage, water supply, gas, electrical and teletechnical networks.
Cut parts on the surface – 18.95mm.

Street grill (No. 35 23037)

Set consists of two manholes – cast iron street inlets. Each manhole consists of two separate parts – the body of the manhole and the cover.
Outflow grates are used to drain rainwater and snowmelt to the sewage system. They are installed at the curbs of the roadway as the culmination of concrete drainage wells. They are made of cast iron, and under the influence of weather conditions they become covered with a rusty coating.
The dimensions of the parts on the surface – 17.37 x 11.67mm.

Revision and drainage manholes (No. 35 23030)

Set consists of 4 different elements of land utilities, most often seen on the streets of Polish cities: a hydrant well, a gas inspection well, a sewage grate and a cast iron manhole.
Each manhole consists of a body mounted in the surface and a cover protecting the opening.
Adding a well consisting of two parts to the diorama guarantees increased realism of the device and allows it to be made with the lid ajar. You can show renovation works on the street, a mutant coming out of the underground, a damaged surface under the Godzilla’s feet or a torn pavement after a bomb hit.

Brooms (No. 35 23047)

Set of resin models made by 3D prinng method containing:
– birch broom
– sorghum broom

Bird house and feeder (No. 35 23045)

Set of resin models made by 3D prinng method containing:
– bird house (2 pcs)
– bird feeder (2 pcs).

Garden pots (No. 35 22031)

Set of twenty garden pots, in various shapes and sizes, will enrich any diorama of a garden, terrace or balcony. The pots are made in various styles – from the most traditional to the modern ones. The set consists of 20 pots (10 types, 2 pcs of each).
The model is made by 3D printing, which allows you to make unusual delicate and small elements.

 

Buckets (No. 35 23042)

Set of resin models made by 3D printing, including: galvanized bucket 12l (2 pcs), galvanized bucket 5l (2 pcs), wooden bucket 7l (2pcs). Each galvanized bucket comes with 2 handles to choose from. Due to the delicacy of the handles – an additional spare set.

Wooden crates for vegetables (No. 35 23046)

Set of resin models made by 3D prinng method containing:
– wooden crate (2 pcs),
– old wooden crate (1 pc)
– very old wooden crate (1 pc)

200l oil / fuel old drums (No. 35 23048)

Set of resin models made by 3D prinng method containing:
– 200 oil/fuel drums (4 pcs)
– bottom (4 pcs)
– large and small cork (4 x 2 pcs + backup)
The cylindrical part of the barrel is flexible – it is possible to make, for example, dents. The desired shape should be hardened with UV rays. To obtain full stiffness and preserve dents, leave the elements in the sun for 10 minutes.
Barrel plugs have threads that fit into the holes. Tightening the corks is possible, although it requires great manual skills and precision. If you have problems screwing in the plugs, you can grind the thread and press them into the hole.

60l oil / fuel drums (No. 35 23049)

Set of resin models made by 3D prinng method containing:
– 60l oil/fuel drums (6 pcs)
– bottom (6 pcs)
– large and small cork (6 x 2 pcs + backup)